Work hardening and X-ray diffraction studies on ASS 304 at high temperatures

Abstract

One of the most common characteristics of metallic alloys is work hardening, which is most beneficial as it is the primary reason for the alloys’ tenacity to withstand loading even in the presence of internal flaws or geometrical errors. Thus, the work hardening coefficient gives the maximum amount of homogeneous plastic deformation in tensile straining. Thus, complex-forming operations are facilitated by a high coefficient without experiencing premature failure. Naturally, work hardening has a significant impact on the mechanical energy required to shape a material by plastic deformation, such as rolling, forming, etc. The quantity of energy that the material stores during plastic deformation is also managed by work hardening. As a result, it significantly influences how the metal behaves when it is subsequently softened during annealing. Finally, the hardening capacity and durability of the work hardened state are significant practical challenges because many high-volume stretch formed components are directly used. Typically, the current study begins, at homologous temperatures above 0.4 times melting point, with a description of work hardening at 700, 800, and 900°C temperatures in three different orientations with respect to rolling direction R 0, R 45, and R 90 and 10−1−10−3 s−1 strain rates, where thermally triggered processes exhibit a prominent role in work hardening. Three stages of behavior were identified by analyzing the tensile work hardening of ASS 304 steel. Dynamic strain aging is the cause of the anomalous fluctuation in the work hardening rate that is seen in hot working temperatures. X-ray diffraction examination is conducted to introspect any phase changes occurring in hot working regions improving plasticity of ASS 304.

Keywords

• work hardening
• hot working
• xrd
• edax
• plasticity deformation