Journal of Mining and Metallurgy. Section B: Metallurgy (Jan 2014)

Application of sacrificial coatings and effect of composition on Al-Al3Ni ultrafine eutectic formation

  • Čelko L.,
  • Klakurková L.,
  • Smetana B.,
  • Slámečka K.,
  • Žaludová M.,
  • Hui D.,
  • Švejcar J.

DOI
https://doi.org/10.2298/JMMB121013038C
Journal volume & issue
Vol. 50, no. 1
pp. 31 – 36

Abstract

Read online

This paper introduces an unconventional method designed for forming hypereutectic alloys via coating deposition onto the substrate surface and subsequent heat treatment of such systems. The coating was produced from 99.7 wt% nickel powder by means of high velocity oxyfuel (HVOF) spraying onto the surface of 99.999 wt% aluminium sheet. The specimens were manufactured immediately after the spraying. Specimens were heat-treated using a differential thermal analysis (DTA) apparatus up to a temperature of 900°C and then cooled down to the room temperature in an argon atmosphere with constant heating and cooling rates, under which the NiAl3 intermetallic phase formed within the initial substrate. Two different alloy microstructures consisting of a coarse eutectic and an ultrafine well-dispersed eutectic were produced. The formation processes and resultant microstructures were studied by means of differential thermal analysis, metallography, scanning electron microscopy, energy dispersive microanalysis, and image analysis techniques.

Keywords