Performance analysis of an Active Magnetic Regenerative system using Al2O3 nanofluids

Abstract

Abstract This study investigates the utilization of Al2O3 nanofluids in an Active Magnetic Regenerative (AMR) system, focusing on varying nanoparticle concentrations from 0.01 to 1.0%. Numerical modelling is used to analyze the effects of nanoparticle incorporation on system efficiency and cooling performance. Al2O3 nanoparticles are found to significantly increase the thermal conductivity, density, and viscosity of the base fluid while reducing specific heat capacity. Comparative analysis reveals that Al2O3 nanofluids outperform pure water in terms of cooling performance, achieving a lower final temperature and a higher temperature span after 60 min of operation. Moreover, the study highlights that cooling capacity and pumping work increase with higher nanoparticle concentrations, with a notable improvement of 64.95% in cooling capacity and 39.31% in pumping work for the 1.0% Al2O3 nanofluid compared to water. The Coefficient of Performance (COP) of the AMR system peaks at an optimal nanoparticle concentration of 0.2%, reaching 3.88, before declining due to increased pumping power requirements.

Keywords

• Active Magnetic Regenerative
• Nanofluids
• Magnetocaloric effect
• Gadolinium