On the Reliability of Surface Current Measurements by X-Band Marine Radar

Abstract

Real-time quality-controlled surface current data derived from X-Band marine radar (MR) measurements were evaluated to estimate their operational reliability. The presented data were acquired by the standard commercial off-the-shelf MR-based sigma s6 WaMoS® II (WaMoS® II) deployed onboard the German Research vessel Polarstern. The measurement reliability is specified by an IQ value obtained by the WaMoS® II real-time quality control (rtQC). Data which pass the rtQC without objection are assumed to be reliable. For these data sets accuracy and correlation with corresponding vessel-mounted acoustic Doppler current profiler (ADCP) measurements are determined. To reduce potential misinterpretation due to short-term oceanic variability/turbulences, the evaluation of the WaMoS® II accuracy was carried out based on sliding means over 20 min of the reliable data only. The associated standard deviation σ W a M o S = 0.02 m/s of the mean WaMoS® II measurements reflect a high precision of the measurement and the successful rtQC during different wave, current and weather conditions. The direct comparison of 7272 WaMoS® II/ADCP northward and eastward velocity data pairs yield a correlation of r   ≥ 0.94 , with | b i a s Δ |   ≤ 0.06 m/s and σ S = 0.05 m/s. This confirms that the MR-based surface current measurements are accurate and reliable.

Keywords

• X-Band radar
• marine radar current measurement
• quality control
• measurement reliability
• accuracies
• precision
• WaMoS^® II
• vessel mounted acoustic Doppler current profiler