Model-Based Optimization Approach for PID Control of Pitch–Roll UAV Orientation

Abstract

This study focuses on the modeling and control optimization of the pitch–roll angles orientation in a quad-rotor UAV (unmanned aerial vehicle) drone system. To address the control challenge, PID (proportional–integral–derivative) controllers are used, which have been tuned through a model-based optimization approach. A non-linear model of the system is obtained and further validated experimentally. The model is implemented in Simulink to conduct model-based optimization. The controller design uses an IMC (internal model control) model-based approach to establish the initial parameters for a PID controller. In the subsequent design phase, a multiobjective approach is taken, incorporating weighted cost functions that account for IAE (integral absolute error) and ITAE (integral of time-weighted absolute error) forms, along with battery usage. The outcomes of this design are showcased through simulations and real-world platform testing.

Keywords

• model-based optimization
• multiobjective optimization
• UAV system