Extraction, characterization and properties evaluation of pineapple leaf fibers from Azores pineapple

Abstract

Pineapple leaves can provide competitive and high-quality fibers for textile purposes. Despite pineapple being cultivated in the Portugues islands there is still a technology gap for the extraction and treatment of Pineapple Leaf Fibers (PALF) in Europe. Since Azorean Pineapple differs significantly from other plants in the bromeliad family, the properties and characterization of its leaf fibers were explored for the first time. Long fibers have been extracted by hand scraping and compared to biological retting at 25 °C for different time periods. It was explored the properties of PALF from plants of different ages (11- and 18-months) and from different zones of the leaves (beginning, middle, and tip). Physical-mechanical properties of Azores PALF were determined, including diameter, linear density, strength, Young's modulus, and elongation at break and characterized by ATR-FTIR, XRD, TGA/DTG, and FESEM to understand their chemical and morphological characteristics. While slight differences were observed between different ages, variations in physical-mechanical properties were notable among fibers extracted from different leaf positions. Extraction of Azores PALF through 25 °C biological retting for 14 days effectively eliminated non-fibrous matter and produced the thinnest and strongest fibers. These fibers ranged between 34.9 and 168.3 μm in diameter, 1.39 and 7.07 tex in linear mass density, 37–993 MPa in tensile strength, 1.0–3.9 % in elongation at break, and 2.4–21.8 GPa in Young's modulus.

Keywords

• Pineapple leaf fibers
• Azores pineapple wastes
• Biological retting
• PALF mechanical properties
• Long fibers