Surface Analysis of Railway Buffers Heads Covered with Bronze Using Laser Cladding

Abstract

Railway buffers during the operation are staying in almost permanent contact with each other, creating friction node in the point of contact of two railway buffer heads. In consequence of overcoming track curves, turnouts and unevenness of track, the railway buffer heads moves relative to each other causing friction, which results in its wear. When the wear is excessive, it might be a reason to withdrawn vehicle from service, it causes flattening of buffer head, and in consequence its abnormal cooperation. To avoid this phenomenon the buffer heads should be covered with graphitized grease, but this method has many disadvantages. Accordingly, it was found that it would be beneficial to cover the buffer head with bronze using laser cladding. In this article the metallographic and mechanical analysis of the newly created top layer of railway buffer head are presented. In article the results from tribological tests conducted on Amsler test bench are also presented. Based on test results described in article concluded that the layer of bronze coat on working surface of railway buffer head can be beneficial from operational point of view.

Keywords

• Wear resistant alloys
• Railway buffer heads
• Laser cladding
• Clads of aluminum bronze CuAl9Fe3
• Properties of clads