Effect of infill strategy on the flexural strength of 3Y-TZP bars fabricated by thermoplastic 3D printing (T3DP)

Abstract

Thermoplastic 3D printing (T3DP) is a ceramic additive-manufacturing (AM) process that uses a thermoplastic feedstock. During T3DP, parts are manufactured by rapid deposition of micron-sized droplets, which fuse and solidify to form lines that fuse further to form layers. This building logic allows modifying the direction of droplet (and line) deposition, and can affect the mechanical properties. Here, we have studied, for the first time, the effect of 0° and 90° infill strategies as well as their combination (0° + 90°) on the strength of fabricated and sintered 3Y-TZP bending bars. The 0° infill strategy had the highest characteristic strength and Weibull modulus. Unlike fused filament fabrication, the strength and Weibull modulus for the 90° infill strategy were not significantly inferior to 0° strategy, due to the better fusion of subsequent lines. However, the 0° + 90° infill strategy had the least strength due to alternating infill strategies each layer.

Keywords

• Thermoplastic 3D printing
• Zirconia
• Fractography