Are torso asymmetry and torso displacements in a computer brace model associated with initial in-brace correction in adolescent idiopathic scoliosis?

Abstract

Abstract Background Lack of initial in-brace correction is strongly predictive for brace treatment failure in adolescent idiopathic scoliosis (AIS) patients. Computer-aided design (CAD) technology could be useful in quantifying the trunk in 3D and brace characteristics in order to further investigate the effect of brace modifications on initial in-brace correction and subsequently long-term brace treatment success. The purpose of this pilot study was to identify parameters obtained from 3D surface scans which influence the initial in-brace correction (IBC) in a Boston brace in patients with AIS. Methods Twenty-five AIS patients receiving a CAD-based Boston brace were included in this pilot study consisting of 11 patients with Lenke classification type 1 and 14 with type 5 curves. The degree of torso asymmetry and segmental peak positive and negative torso displacements were analyzed with the use of patients’ 3D surface scans and brace models for potential correlations with IBC. Results The mean IBC of the major curve on AP view was 15.9% (SD = 9.1%) for the Lenke type 1 curves, and 20.1% (SD = 13.9%) for the type 5 curves. The degree of torso asymmetry was weakly correlated with patient’s pre-brace major curve Cobb angle and negligible correlated with major curve IBC. Mostly weak or negligible correlations were observed between IBC and the twelve segmental peak displacements for both Lenke type 1 and 5 curves. Conclusion Based on the results of this pilot study, the degree of torso asymmetry and segmental peak torso displacements in the brace model alone are not clearly associated with IBC.

Keywords

• Scoliosis
• Brace
• In-brace correction
• CAD technology
• Predictive factors