Buildings (Mar 2023)
High-Cycle Fatigue Properties of Titanium-Clad Bimetallic Steel with Different Interfacial Conditions
Abstract
Titanium-clad (TC) bimetallic steel is an advanced composite steel consisting of metallurgically bonded titanium alloy and structural steel. This paper compared the high-cycle fatigue properties of three types of TC bimetallic steels, including two hot-rolled bonding types with different bonding strengths and an explosion-bonded type. The three types of TC bimetallic steels were all manufactured from TA2 titanium alloy as the cladding metal and Q355B structural steel as the substrate metal, of which the thicknesses are 2 mm and 8 mm, respectively. Based on the comparison results, the qualitative relationship between the bonding interface strength and the manufacturing methods with the basic mechanical and high-cycle fatigue properties was obtained. It was found that the different manufacturing methods and the bonding degree of the two component metals resulted in the different nonlinear yield plateau in the TC bimetallic steel. The high bonding strength seems to affect the failure mode of the tensile coupons. The bonding interface shear strength only slightly affects the tensile performance, which exhibits visible effects only when the test strain reaches the fractured state. In addition, three failure modes in total were found in the high-cycle fatigue tests for the three types of TC bimetallic steel. The manufacturing methods and the bonding interface strength significantly affect the fatigue phenomena of the TC bimetallic steel. The hot-rolled bonding TC bimetallic steel with high bonding strength has a 10% improvement in fatigue performance than the one with low bonding strength. Despite this, the manufacturing methods significantly affect the fatigue ratio, while the influence of the bonding strength on the high cycle fatigue performance is limited. The research outcomes can provide reference for the selection of different manufacturing methods and interfacial conditions for the use of TC bimetallic steel in structural engineering.
Keywords