Mechanical and physical characteristics of concrete mixed with sugarcane bagasse ash and recycled polyethylene terephthalate

Abstract

The goal of this study was to produce sustainable concrete by reducing reliance on cement, which contributes to high carbon footprints, and natural sand, which is being depleted. Sugarcane bagasse ash (SCBA) was used to partially replace cement at 5 %, 10 %, and 15 %, while recycled polyethylene terephthalate (RPET) was used to partially replace sand at 5 %, 10 %, 15 %, and 20 %. The effects of these substitutions on concrete's mechanical and physical properties were examined after 28 days of water curing. The study observed a decrease in fresh density by 0.36 %–2.67 % with SCBA and RPET inclusion. The slump values ranged between 93 mm and 140 mm, indicating good workability. The reference concrete's compressive strength was 39.65 MPa, while the mix with 5 % SCBA and 10 % RPET achieved 38.23 MPa. This mix also showed a 1.2 % higher split tensile strength than the reference concrete. Although the reference concrete's flexural strength was the highest at 4.56 MPa, all SCBA-RPET mixes remained within 86 % of this value. All modified mixes weighed less than the reference concrete, with the compressive strength-to-weight ratio of the mix with 5 % SCBA and 10 % RPET being closest to the reference mix with only a 2.44 % reduction. These findings suggest that SCBA and RPET can be effectively used to produce sustainable concrete with comparable mechanical properties to conventional concrete.

Keywords

• Sustainable concrete
• Waste materials
• Material properties
• Fresh and hardened concrete