Crystals (Jan 2022)

Parametric Optimization of Local Resonant Sonic Crystals Window on Noise Attenuation by Using Taguchi Method and ANOVA Analysis

  • Hsiao Mun Lee,
  • Yuting Hua,
  • Jinlong Xie,
  • Heow Pueh Lee

DOI
https://doi.org/10.3390/cryst12020160
Journal volume & issue
Vol. 12, no. 2
p. 160

Abstract

Read online

Local resonant sonic crystals (LRSCs) window as a novel design has recently been proposed to achieve a good balance between noise mitigation, natural ventilation and natural lighting. In an effort to explore the feasibilities of such designs in civil residential buildings, an optimization methodology was proposed to develop a more compact LRSCs window with high noise attenuation performance in the present study. Specifically, the Taguchi method was adopted for the design of experiments on the parameters of interest and their corresponding levels, and SN ratio analysis was then applied for the parametric evaluations on the noise attenuation on specified frequencies in traffic noise (concentrated sound energy frequency range: 630–1000 Hz). Three optimal sets of design parameters on the interested frequencies, namely, 630 Hz, 800 Hz and 1000 Hz were obtained. ANOVA analysis was conducted to quantificationally identify the design parameters with statistical significance and remarkable contribution to the desired performance. Results indicate that the slit size has the most significant influence on the overall noise attenuation performance, followed by cavity width. An optimal set of design parameters to achieve the overall best noise reduction performance in the frequency range of 630–1000 Hz was finally determined by combining the SN ratio and ANOVA analysis. A prototype of the final optimized LRSCs window was then fabricated and tested in a semi-anechoic chamber. Good agreement was found between the experiment and numerical simulation. In comparison to the benchmark case, the final optimized design can achieve a further noise reduction by 2.84 dBA, 3.48 dBA and 5.56 dBA for the frequencies of 630 Hz, 800 Hz and 1000 Hz, respectively. The overall noise reduction for the interested frequency range can be promoted by 3.28 dBA. The results indicate that the proposed optimization methodology is practical and efficient in designing a high-performance LRSCs window or improving similar applications.

Keywords