APL Photonics (Mar 2024)

Tunable and stable micro-ring resonator based on thin-film lithium tantalate

  • Jiayang Yu,
  • Ziliang Ruan,
  • Yu Xue,
  • Haohua Wang,
  • Ranfeng Gan,
  • Tian Gao,
  • Changjian Guo,
  • Kaixuan Chen,
  • Xin Ou,
  • Liu Liu

DOI
https://doi.org/10.1063/5.0187996
Journal volume & issue
Vol. 9, no. 3
pp. 036115 – 036115-6

Abstract

Read online

As ferroelectric materials, lithium tantalate and lithium niobate share similar material characteristics, such as a high Pockels effect and nonlinear optical coefficients. When compared to lithium niobate, lithium tantalate offers a higher optical damage threshold, a broader transparent window, and lower birefringence, making it a promising candidate for high-performance electro-optical photonic integrated devices. In this study, we design and successfully fabricate micro-ring resonators on an acoustic-grade lithium-tantalate-on-insulator wafer, demonstrating their tunability and dynamic modulation capabilities. Experimental results indicate that the achieved thin-film lithium tantalate based micro-ring resonator exhibits an intrinsic Q-factor of 8.4 × 105, corresponding to a waveguide propagation loss of 0.47 dB/cm and a tuning efficiency of 1.94 pm/V. More importantly, as compared to those based on thin-film lithium niobate, a much weaker photorefractive effect and drift phenomenon around the 1550 nm wavelength under a direct-current drive are observed in the present fabricated thin-film lithium tantalate micro-rings with a silicon oxide over-cladding and a tuning electrode on top.