Alexandria Engineering Journal (Dec 2012)
Applications of the observational method in deep foundations
Abstract
The observational method was introduced into geotechnical engineering to improve both theories and construction techniques. This method was developed to avoid highly conservative assumptions about soil properties in geotechnical design when faced with unavoidable uncertainties of natural ground conditions. The assumptions involved in soil mechanics theories usually differ to a certain extent from reality. These assumptions can be improved by employing an observational database. Thus, theories of geotechnical engineering can be developed by observations during the construction stage. Moreover, precise management of construction work by close observations is essential to avoid risk and to alter the design if needed to match the real conditions. This paper sheds some light on the importance of the observational concept in deep foundations through three case studies. The first one demonstrates the effect of working hypotheses on design outputs of an open caisson of 22 m internal diameter. The other two case studies present the difference between theory and reality during construction stage of auger cast-in-place piles (ACIP) in difficult subsoil conditions. Importance of merging the documented theories with the available observations is discussed. The study shows that working hypotheses and engineering models affect the cost and the time required for construction of deep foundations. Field observations are essential during installation of ACIP at a site. Some precautions should be considered when drilling ACIP through sandstone of inclined top surface. These precautions are mainly dependent upon field observations during construction. ACIP can be used effectively in soil formations that have galleries and caves using a cement–bentonite mixture to fill the holes of the unsuccessful piles. Finally, the paper shares a series of practical guidelines with engineering community all over the world that may assist in design and construction of deep foundations.
Keywords