Effect of Supply and Exhaust Air Velocity on the Enthalpy and Temperature Exchange Efficiency of a Paper Heat Exchanger

Abstract

Heat Recovery Ventilators (HRV) are gradually becoming more popular in urban cities and buildings as it is able to effectively maintain the indoor air quality while also using minimal amounts of energy. The key component in the HRV is the Paper Heat Exchanger, which allows the heat exchange of indoor and outdoor air through a crossflow, while also filtering out stale air and dust particles. This article investigates the effect of manipulating the supply and exhaust air velocity on the enthalpy and temperature exchange efficiency of a paper heat exchanger. Data is obtained from experimental results, where the experiments are conducted in a test lab using heat recovery ventilators (HRV) installed with paper heat exchangers. Two paper heat exchangers from different suppliers were tested inside a HRV installed in an air conditioned room. The HRV fan speed was varied at a fixed interval of 0.5 m/s, and the air velocity was measured by using a wind speed meter. At the same time, a USB data logger was used to collect relative humidity and temperature of the air at the supply inlet, indoor air inlet, and return air outlet to determine temperature exchange efficiency and the enthalpy of air. The results of the testing shows that the HRV was able to achieve a temperature exchange efficiency of 47 to 63% and enthalpy exchange efficiency of 63 to 94% for PHEX-A, and a temperature exchange efficiency of 28 to 48% and enthalpy exchange efficiency of 57 to 85% for PHEX-B. The data shows that PHEX-A has higher efficiency than PHEX-B.