Mechanical and Thermo-Mechanical Behaviors of Snake Grass Fiber-Reinforced Epoxy Composite

Abstract

Snake grass fiber was used as a supporting material in an epoxy matrix. The goal was to develop a lightweight structural material. To enhance the interfacial bonding between the snake grass (Sansevieria ehrenbergii) fiber and polymer matrices, the fiber underwent chemical treatment with NaOH. Samples were prepared with both neat and treated fibers mixed with epoxy at various volume percentages. The mechanical properties of snake grass fiber exhibited improvement with increasing fiber length and fixation, reaching optimal values at 20 mm length and 20% v/v fixation. Dynamic mechanical analysis (DMA) demonstrated superior energy absorption by the composite up to 140 °C, irrespective of repetition. Thermogravimetric analysis (TGA) indicated rapid degradation of untreated fiber with a residue level of 0.2%, while the snake grass composite (25% v/v) exhibited stable residue content at 11%. Microscopic evaluation using a scanning electron microscope provided insights into the morphology of the fiber surface.

Keywords

• snake grass
• composite
• epoxy
• natural filler
• biopolymer
• environmental footprint