Physical and 3D numerical modelling of reinforcements pullout test

Abstract

Abstract This paper reports results of laboratory and 3D numerical modeled pull-out tests with steel ladders and polymeric strip reinforcements. These types of reinforcement are commonly used in reinforced soil walls constructed with concrete facing elements. Laboratory pull-out tests are required to determine accurate and realistic pull-out strength values considering the interaction of specific reinforcement and backfill materials under different confining pressures (i.e., trying to simulate the different reinforcement layer arrangements and load conditions in actual reinforced soil walls). International design Codes for reinforced soil walls provide default values for pull-out strength. However, in many cases, default values are too conservative and/or are not strictly specified for particular reinforcement types. Pull-out tests can be difficult and expensive to perform, thus not being common nor worth for the vast majority of reinforced soil wall projects. Consequently, calibrated numerical models can be useful to predict pull-out response under site-specific conditions, and provide further understanding of the mechanisms involved in the soil-reinforcement interaction. Details of the numerical approach, including relevant aspects of the soil-reinforcement interfaces, are described. Examples of calibrated numerical predictions for pull-out loads, displacements, and soil-dilatancy effects are presented. The influence of reinforcement, soil and interface stiffnesses is shown. Numerical results provide useful insight for future modelling works of the complex interaction between type-specific backfill materials and reinforcement element, relevant for investigation and/or practical design of reinforced soil walls.

Keywords

• 3D modelling
• Soil-reinforcement interaction
• Pullout tests
• Finite element modelling
• Reinforced soil walls
• Polymeric strip reinforcement