Materials Research Express (Jan 2024)

High-temperature mechanical properties of additively manufactured 420 stainless steel

  • Harveen Bongao,
  • Manjaiah M,
  • Persia Ada de Yro,
  • Jubert Pasco,
  • Thomas McCarthy,
  • Kudakwashe Nyamuchiwa,
  • Clodualdo Aranas Jr

DOI
https://doi.org/10.1088/2053-1591/ad425d
Journal volume & issue
Vol. 11, no. 5
p. 056501

Abstract

Read online

Martensitic stainless steels are indispensable alloys in various high stress and temperature applications such as plastic injection molds and components in steam generators. Subtractive manufacturing methods used to fabricate these parts, however, limits its functionality and performance due to design constraint of cooling channels. This limitation can be resolved by means of additive manufacturing while ensuring that acceptable high-temperature properties can be achieved. In this work, the mechanical behavior of additively manufactured 420 stainless steel (AM420SS) is explored through material constitutive modeling to determine the mathematical model that best describes its flow stress in extreme conditions. This is accomplished by subjecting the samples to hot compression under the strain rates of 0.1–1.0 s ^−1 , and temperatures between 973–1423 K (700 °C–1150 °C) via Gleeble thermomechanical test. The experimental data were used to generate the predictive flow stress curves of constitutive models which includes Johnson-Cook, Zerilli-Armstrong, Zener-Hollomon, and Hensel-Spittel equations. Results showed that Zener-Hollomon and Hensel-Spittel models are the most accurate material constitutive equations with relatively high R values of 0.986 and 0.976, and low average absolute relative error values of 6.96% and 7.69%, respectively. The material constants derived from these models can be applied in finite element analysis simulations to assess the performance of using AM420SS parts at high temperature and strain conditions.

Keywords