Improvement in low-temperature toughness of Fe-6.5Mn-0.08C Medium-Mn steel by multi-step heat treatment

Abstract

In this study, a novel multi-step heat treatment method, including intercritical annealing and tempering, is proposed to improve the low-temperature toughness of Fe-6.5Mn-0.08C medium-manganese (Mn) steel. The effects of the subsequent tempering treatment on the microstructural evolution and low-temperature toughness of medium-Mn steel were investigated and compared with those of a single intercritical annealing treatment. Medium-Mn steel subjected to intercritical annealing exhibited a duplex microstructure composed of martensite and nanolaminate-retained austenite. The subsequent tempering treatment after intercritical annealing generated a more homogenous distribution of retained austenite, together with an increase in the volume fraction of the retained austenite. The uniformly distributed retained austenite prevented Mn segregation at prior austenite grain boundaries, and the high fraction of retained austenite effectively inhibited crack propagation, leading to an improvement in the low-temperature toughness. In addition, the subsequent tempered medium-Mn steel contained a considerable amount of retained austenite, which could transform into martensite during the impact test, resulting in an impact fracture morphology that changed from cleavage facets to dimples at low temperatures.

Keywords

• Medium-Mn steel
• Microstructure
• Low-temperature toughness
• Multi-step heat treatment
• Retained austenite