Effect of two-step ausforming on bainite transformation and retained austenite in a medium-carbon bainitic steel

Abstract

It is commonly accepted that single ausforming with small strain at low temperature promotes isothermal bainite transformation and leads to more retained austenite. In the present study, the effects of two-step ausforming on the bainite transformation and retained austenite in a Fe-C-Mn-Si medium-carbon bainitic steel were investigated by thermo-mechanical simulator, x-ray diffraction, scanning electron microscope and transmission electron microscope. The results show that the two-step ausforming cannot further promote the bainite transformation compared with single ausforming. However, the two-step ausforming enhances the mechanical stability of residual austenite due to more dislocations induced by the second deformation and therefore leads to more retained austenite. In addition, when the total strain is constant, the fraction of retained austenite increases with the increasing second strain. Moreover, the thickness of bainite plates treated with two-step ausforming is larger compared with single-step ausforming when the total strain is the same.

Keywords

• bainitic steel
• thermomechanical processing
• phase transformation
• dilatometry
• two-step ausforming