Slope stability analyses by circular failure chart and limit equilibrium methods: the inlet and outlet of diversion tunnel of Bolango Ulu Dam, Indonesia

Abstract

The objective of this research is to evaluate the stability of the natural slopes at the inlet and outlet portals of the Bolangu Ulu diversion tunnel, Gorontalo. The natural slopes were considered stable, and therefore slope stability analyses were not carried out previously in the tunnel portal design. The slope stability analyses were carried out using the Circular Failure Chart (CFC) and Limit Equilibrium Methods (LEM). Input data for the slope stability analyses were obtained from field mapping and laboratory testing of soil and rock samples. The results show that the portal slopes consist of diorite and residual soil. Both stability analysis methods yield nearly the same results. The slope at the outlet section had the factor of safety (FOS) values of 1.29 and 1.30 based on the CFC method and LEM, respectively, indicating the slope in a stable condition. However, the slope at the inlet section had the FOS values of 1.01 and 1.07 based on the CFC method and LEM, respectively, indicating the slope in a critical condition. The results suggest that stabilization of the portal slopes, particularly the portal slope at the inlet section, is required to prevent slope failures under static and earthquake loads.