CFD-PBM Approach with Different Inlet Locations for the Gas-Liquid Flow in a Laboratory-Scale Bubble Column with Activated Sludge/Water

Abstract

A novel computational fluid dynamics-population balance model (CFD-PBM) for the simulation of gas mixing in activated sludge (i.e., an opaque non-Newtonian liquid) in a bubble column is developed and described to solve the problem of measuring the hydrodynamic behavior of opaque non-Newtonian liquid-gas two-phase flow. We study the effects of the inlet position and liquid-phase properties (water/activated sludge) on various characteristics, such as liquid flow field, gas hold-up, liquid dynamic viscosity, and volume-averaged bubble diameter. As the inlet position changed, two symmetric vortices gradually became a single main vortex in the flow field in the bubble column. In the simulations, when water was in the liquid phase, the global gas hold-up was higher than when activated sludge was in the liquid phase in the bubble column, and a flow field that was dynamic with time was observed in the bubble column. Additionally, when activated sludge was used as the liquid phase, no periodic velocity changes were found. When the inlet position was varied, the non-Newtonian liquid phase had different peak values and distributions of (dynamic) liquid viscosity in the bubble column, which were related to the gas hold-up. The high gas hold-up zone corresponded to the low dynamic viscosity zone. Finally, when activated sludge was in the liquid phase, the volume-averaged bubble diameter was much larger than when water was in the liquid phase.

Keywords

• CFD-PBM
• numerical simulation
• non-Newtonian/Newtonian liquid
• bubble column