Sensors (Dec 2024)
Innovative Modeling of IMU Arrays Under the Generic Multi-Sensor Integration Strategy
Abstract
This research proposes a novel modeling method for integrating IMU arrays into multi-sensor kinematic positioning/navigation systems. This method characterizes sensor errors (biases/scale factor errors) for each IMU in an IMU array, leveraging the novel Generic Multisensor Integration Strategy (GMIS) and the framework for comprehensive error analysis in Discrete Kalman filtering developed through the authors’ previous research. This work enables the time-varying estimation of all individual sensor errors for an IMU array, as well as rigorous fault detection and exclusion for outlying measurements from all constituent sensors. This research explores the feasibility of applying Variance Component Estimation (VCE) to IMU array data, using separate variance components to characterize the performance of each IMU’s gyroscopes and accelerometers. This analysis is only made possible by directly modeling IMU inertial measurements under the GMIS. A real land-vehicle kinematic dataset was used to demonstrate the proposed technique. The a posteriori positioning/attitude standard deviations were compared between multi-IMU and single IMU solutions, with the multi-IMU solution providing an average accuracy improvement of ca. 14–16% in the estimated position, 30% in the estimated roll and pitch, and 40% in the estimated heading. The results of this research demonstrate that IMUs in an array do not generally exhibit homogeneous behavior, even when using the same model of tactical-grade MEMS IMU. Furthermore, VCE was used to compare the performance of three IMU sensors, which is not possible under other IMU array data fusion techniques. This research lays the groundwork for the future evaluation of IMU array sensor configurations.
Keywords
