Removal of trivalent metal ions from aqueous solution via cross-flow ultrafiltration system using zeolite membranes

Abstract

This study aimed to assess the performance of three zeolite membranes in the removal of trivalent metal ions from aqueous solution using a cross-flow mode of operation. Three types of zeolite membrane, MCM-41, MCM-48 and FAU, were prepared on a low-cost, circular ceramic support by hydrothermal treatment. The three zeolite membranes were characterized by using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and contact angle measurements. The XRD results confirmed the formation of zeolites. The deposition of zeolite on the ceramic support and hydrophilicity of zeolite membranes were monitored by FESEM and contact angle measurement, respectively. The pore size of the MCM-41, MCM-48 and FAU membrane was found to be 0.173 μm, 0.142 μm, and 0.153 μm, respectively, which was lower than that of the support (1.0 μm). The fabricated zeolite membranes were used to investigate the separation behavior of trivalent metal ions (Al3+ and Fe3+) from aqueous solution at various applied pressures. It was observed that an increase of applied pressure leads to a slight decrease in the removal efficiency. Among the various zeolite membranes, the FAU membrane showed the maximum rejection of 88% and 83% for Fe3+ and Al3+ separation, respectively.

Keywords

• membrane separations
• pollutants
• separation
• water treatment
• zeolites