Failure Life Prediction of Hub Bearing in Composite Tooling

Abstract

Composite work tools have many components, and complex shapes when compared to standard tools such as rotaries and plows. In addition, the component durability for the tools is critical because the load varies severely according to the soil conditions. This study predicts the fatigue life of the hub bearing in composite work tooling. The loads acting on the tools were measured based on field tests, and the loads acting on the hub bearing were derived using the load reconstruction method. The static safety factor and fatigue life of the hub bearing, loads, and contact stress acting on the inner and outer raceways and presence of truncation were analytically predicted based on the derived loads. The fatigue life of the bearing changed depending on the preload amount of the hub bearing. The bearing life was more than 3000 h for preloads of less than 40 μm, which satisfied the target life of 1200 h. The load acting on the inner and outer raceways of the bearing decreased and then increased as the preload amount of the bearing rose. The bearing contact area, maximum contact stress, and number of balls increased as the load applied to the hub bearing rose. The fatigue life, load, contact stress, and static safety factor of the hub bearing met all requirements, and no truncation occurred on the inner and outer raceways of the bearing. The test verified the achievement of the target life of 1200 h and confirmed that there was no breakage, cracking, or deformation of the bearing.

Keywords

• composite tooling
• disk harrow
• failure life
• hub bearing
• prediction