Minerals (Nov 2022)

Valorization of South African Coal Wastes through Dense Medium Separation

  • Juarez R. do Amaral Filho,
  • Msimelelo Gcayiya,
  • Athanasios Kotsiopoulos,
  • Jennifer L. Broadhurst,
  • David Power,
  • Susan T. L. Harrison

DOI
https://doi.org/10.3390/min12121519
Journal volume & issue
Vol. 12, no. 12
p. 1519

Abstract

Read online

Sustainable management of coal waste is one of the major environmental concerns for coal mining, whether active or legacy, worldwide. Coal dump deposits demand a large physical area or footprint for disposal of solid waste, change the topography, and generate both pyritic dust and acid rock drainage (ARD) where pyritic coal waste is deposited. The beneficiation of dump deposits or, preferably, of coal waste prior to its dumping can reduce or even eliminate the liabilities related to coal waste management. In this work, dense medium separation studies of coal discards, using heavy liquids, resulted in three pooled fractions from typical South African coal waste discards from the Mpumalanga region for future use: (a) a fraction of low density with increased calorific value; (b) a fraction of intermediate density, rich in ash and acid neutralizing minerals and lower in sulfur; and (c) a fraction of high density, rich in sulfidic minerals including pyrite. The fractions were characterized using particle size analysis, sink-float studies, static tests to predict ARD potential, proximateand ultimate analysis, and gross calorific value. The results showed that approximately 70% of this discard coal is composed of a material of sufficient quality for energy generation in conventional power stations. A pyrite-rich concentrate made up 2% of the total discard mass; comprising more than 45% of the sulfidic mineral present in the feed and displaying no acid neutralizing capacity (ANC). The remaining discard fraction, with intermediate density, presented potential to be used for several ends including soil fabrication, co-disposal or as aggregate material in civil engineering; additional testing to ensure applicability for the selected re-purposing option should be chosen based on proposed use.

Keywords