Ash and Flue Gas from Oil Shale Oxy-Fuel Circulating Fluidized Bed Combustion

Abstract

Carbon dioxide emissions are considered a major environmental threat. To enable power production from carbon-containing fuels, carbon capture is required. Oxy-fuel combustion technology facilitates carbon capture by increasing the carbon dioxide concentration in flue gas. This study reports the results of calcium rich oil shale combustion in a 60 kWth circulating fluidized bed (CFB) combustor. The focus was on the composition of the formed flue gas and ash during air and oxy-fuel combustion. The fuel was typical Estonian oil shale characterized by high volatile and ash contents. No additional bed material was used in the CFB; the formed ash was enough for the purpose. Two modes of oxy-fuel combustion were investigated and compared with combustion in air. When N2 in the oxidizer was replaced with CO2, the CFB temperatures decreased by up to 100 °C. When oil shale was fired in the CFB with increased O2 content in CO2, the temperatures in the furnace were similar to combustion in air. In air mode, the emissions of SO2 and NOx were low (<14 and 141 mg/Nm3 @ 6% O2, respectively). Pollutant concentrations in the flue gas during oxy-fuel operations remained low (for OXY30 SO2 < 14 and NOx 130 mg/Nm3 @ 6% O2 and for OXY21 SO2 23 and NOx 156 mg/Nm3 @ 6% O2). Analyses of the collected ash samples showed a decreased extent of carbonate minerals decomposition during both oxy-fuel experiments. This results in decreased carbon dioxide emissions. The outcomes show that oxy-fuel CFB combustion of the oil shale ensures sulfur binding and decreases CO2 production.

Keywords

• circulating fluidized bed combustion
• carbon capture
• storage and utilization
• sulfur binding
• nitrogen oxides
• emissions
• ash behavior
• carbonate minerals