A Seawater Salinity Sensor Based on Optimized Long Period Fiber Grating in the Dispersion Turning Point

Abstract

Variations of seawater salinity often cause ocean internal waves, water masses and stratification, which affect the stability of the ocean environment. Therefore, the study of seawater salinity is significant for the prediction of changes in the ocean environment. However, existing methods for measuring seawater salinity generally have the disadvantages of low sensitivity and low accuracy. In this work, we proposed a seawater salinity sensor based on long period fiber grating (LPFG) in the dispersion turning point (DTP), which has demonstrated the possibility to fabricate LPFG with a shorter grating period by CO2 laser in a thin single mode fiber (SMF) of 80 μm cladding diameter without etching. For obtaining higher sensitivity that could meet the measurement requirement in practice, the proposed sensor was optimized by combining etching cladding and DTP. After the LPFG working near DTP was fabricated by a CO2 laser, the cladding diameter was reduced to 57.14 μm for making cladding mode LP1,7 work near DTP by hydrofluoric acid (HF) solutions. The experimental results have demonstrated that a sensitivity of 0.571 nm/‰ can be achieved when the salinity increases from 5.001‰ to 39.996‰, and the sensor shows good repeatability and stability. Based on its excellent performance, the optimized LPFG is a prospective sensor to monitor seawater salinity in real time. Meanwhile, a low-cost way was provided to make LPFG work near DTP instead of ultraviolet exposure and femtosecond laser writing.

Keywords

• fiber grating
• salinity measurement
• high sensitivity
• etching cladding