Preparation of Cellulose Films from Sustainable CO₂/DBU/DMSO System

Abstract

Cellulose films are regarded as sustainable materials having wide applications in food packaging, separation, etc. Their preparation substantially relies on sufficient dissolution. Herein, various celluloses adequately dissolved in a new solvent system of carbon dioxide,1, 8-diazabicyclo [5.4.0] undec-7-ene and dimethyl sulfoxide (CO2/DBU/DMSO) were made in to films using different regeneration reagents. The films regenerated from ethanol and methanol presented homogeneous and smooth surfaces, while those from 5 wt % NaOH (aq.) and 5 wt % H2SO4 (aq.) showed rough surfaces, as analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The films regenerated from 5 wt % NaOH (aq.) and 5 wt % H2SO4 (aq.) rendered cellulose II structures, while those regenerated from alcohols had amorphous structures as evidenced using fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) results. The films made of microcrystalline cellulose had a good light transmittance of about 90% at 800 nm with a tensile strength of 55 MPa and an elongation break of 6.5%, while those from wood pulp cellulose demonstrated satisfactory flexibility with a tensile strength of 91 MPa and an elongation break of 9.0%. This research reports a simple, environmental, and sustainable method to prepare cellulose films of good mechanical properties.

Keywords

• CO₂
• cellulose dissolution
• cellulose films
• regeneration