Wind Energy Science (Oct 2020)

Lidar measurements of yawed-wind-turbine wakes: characterization and validation of analytical models

  • P. Brugger,
  • M. Debnath,
  • A. Scholbrock,
  • P. Fleming,
  • P. Moriarty,
  • E. Simley,
  • D. Jager,
  • J. Roadman,
  • M. Murphy,
  • H. Zong,
  • F. Porté-Agel

DOI
https://doi.org/10.5194/wes-5-1253-2020
Journal volume & issue
Vol. 5
pp. 1253 – 1272

Abstract

Read online

Wake measurements of a scanning Doppler lidar mounted on the nacelle of a full-scale wind turbine during a wake-steering experiment were used for the characterization of the wake flow, the evaluation of the wake-steering set-up, and the validation of analytical wake models. Inflow-scanning Doppler lidars, a meteorological mast, and the supervisory control and data acquisition (SCADA) system of the wind turbine complemented the set-up. Results from the wake-scanning Doppler lidar showed an increase in the wake deflection with the yaw angle and that the wake deflection was not in all cases beneficial for the power output of a downstream turbine due to a bias of the inflow wind direction perceived by the yawed wind turbine and the wake-steering design implemented. Both observations could be reproduced with an analytical model that was initialized with the inflow measurements. Error propagation from the inflow measurements that were used as model input and the power coefficient of a waked wind turbine contributed significantly to the model uncertainty. Lastly, the span-wise cross section of the wake was strongly affected by wind veer, masking the effects of the yawed wind turbine on the wake cross sections.