Alternative methods of scaling Eucalyptus urophylla trees in forest stands: compatibility and accuracy of volume equations

Abstract

This study developed and tested a procedure that aimed to reduce the cost of forest stand volume estimation. Using a typical 3 x 3 m Eucalyptus urophylla plantation, estimates based on a simplified approach were compared with those of precise but costly reference methods. The simplified approach required measuring the total height and bole diameters up to 2 m high. The volume of the lower part was estimated using Smalian’s formula, while the volume of the upper part was estimated using a simple solid as an approximation. Three typical solids were tested: paraboloid, cone, and neiloid. The approach proposed is non-destructive, because it does not require tree felling, while precise methods are destructive. The operational (traditional) method uses Smalian’s formula to measure bole diameter at short intervals over the whole bole, while the precise, more research-suited (reference) method records water displacement (using a xylometer) to accurately measure the volume of each bole section. The reference and traditional methods, as expected, produced very similar results. The approach proposed, using a paraboloid for the upper part, provided results that were not statistically different to the reference values. The volumes estimated by the proposed approach were used to calibrate the Schumacher-Hall function, and the performance of the model was evaluated using the values obtained by the xylometer.

Keywords

• Forest Inventory
• Rigorous Scaling
• Dendrometric Prototype
• Volume Equation
• Modeling