Effect of matrix resin components on properties of the semi‐conductive shielding material for high‐voltage cable

Abstract

Abstract The semi‐conductive shielding layer is an important part of the high‐voltage cable, playing a role in uniform electric field and reducing the air gap at the interface. The overall performance of the cable is affected by the semi‐conductive shielding layer with different base resin composition. The matrix resins of ethylene‐vinyl acetate (EVA), ethylene‐ethyl acrylate (EEA) and ethylene‐butyl acrylate (EBA) were used to prepare the semi‐conductive shielding materials of CB/EVA, CB/EEA and CB/EBA. The influences of different matrix resins on the chemical, electrical, thermal and mechanical properties of the shielding materials were investigated. The results show that CB has the best dispersion in EBA resin and the worst dispersion in EEA resin. The temperature inflection points of CB/EVA, CB/EEA and CB/EBA shielding materials are 90°C, 100°C and 110°C, respectively, and the CB/EBA shielding material has the lowest resistivity and the weakest positive temperature coefficient effect at room temperature. The thermal conductivity of all three matrix resins is smaller than that of the shielding material, the thermal conductivity of CB/EVA and CB/EBA shielding materials show a slow increase with temperature, and the CB/EEA shielding material is the least affected by the temperature. The mechanical properties of the three matrix resins and the three shielding materials are EBA > EVA > EEA, among them the stress of CB/EBA shielding material is 31.0 MPa and the strain is 570%. This work has important reference significance for the selection of shielding layer matrix resin and material formulation in engineering applications.