Ain Shams Engineering Journal (Mar 2023)
The research about application of quasi-zero stiffness vibration isolation technology in a large vehicle-mounted optic-electronic equipment
Abstract
The large vehicle-borne optic-electronic tracking equipment has the characteristics of heavy inertia, complex road condition and wide vibration spectrum. In order to solve the problem of passive broadband vibration isolation for vehicle-mounted moving platform optic-electronic equipment, a combined quasi-zero stiffness vibration isolation scheme is proposed. The vibration of the engine, generator, water cooler and the remaining vibration amplitude, frequency and Yaw of the road after passing the self-vibration isolation system of the vehicle are collected and confirmed by means of calculation simulation and field test. At the same time, the effective load of photoelectric equipment is analyzed by frequency sweeping test, and the corresponding multi-mode frequency points are obtained. According to the characteristics of the special equipment, a quasi-zero-stiffness vibration isolation system is designed to suppress the wide-frequency and high-amplitude vibration and Yaw caused by vehicle-borne vibration source, ground vibration source and resonance point of the equipment, the foundation stability of load equipment under dynamic condition is realized, which provides a condition for solving the problem of high precision and stability tracking which is greatly influenced by vibration. The vibration isolation system can realize the vibration isolation efficiency of 90% in the range of 20 Hz to 2000 Hz under the condition of 60 Km/h three-class highway with 1.5 t photoelectric load, and restrain the deflection caused by unbalance torque and vibration source offset effectively. It can be concluded that the quasi-zero stiffness vibration reduction and isolation combination design can effectively suppress the vibration of the large-scale vehicle-mounted optic-electronic equipment under the condition of moving platform.
