BioResources (Apr 2024)

Parameter Identification Procedure for Hysteretic Shear-Resistant Properties of Beech Wood Dowels

  • Jiwei Liu,
  • Huifeng Yang,
  • Yutao Zhou,
  • Benkai Shi,
  • Haotian Tao

Journal volume & issue
Vol. 19, no. 2
pp. 3681 – 3698

Abstract

Read online

To evaluate the shear-resistant behavior of wooden dowels used in Blockhaus shear walls under cyclic load, 19 specimens under ten groups of conditions were prepared and tested. The failure modes, hysteresis curves, mechanical properties, stiffness degradations, and energy dissipation capacities of the specimens were studied. The test results showed that with the increase in the number of dowels, the initial stiffness and peak load of the specimens increased greatly. The diameter of the dowels had little influence on the mechanical properties of the specimens. Furthermore, the test findings demonstrated that the pretension load between the walls greatly enhanced the initial stiffness and energy dissipation capacity of specimens. A simplified finite element model was established in Opensees. Considering the effect of material variability, the parameters of single dowel shear spring and friction spring were identified by Genetic Algorithm with modified objective function in Matlab. The identified parameters were applied to the finite element model of the multi-dowel specimens. The simulation results were in good agreement with the test results, and the validity of the numerical model and parameter identification method was verified.

Keywords