GCB Bioenergy (Aug 2023)

Comparative LCA studies of simulated HMF biorefineries from maize and miscanthus as an example of first‐ and second‐generation biomass as a tool for process development

  • Markus Götz,
  • Jan Lask,
  • Iris Lewandowski,
  • Andrea Kruse

DOI
https://doi.org/10.1111/gcbb.13079
Journal volume & issue
Vol. 15, no. 8
pp. 1011 – 1029

Abstract

Read online

Abstract 5‐Hydroxymethylfurfural (HMF) is a versatile platform chemical for a fossil free, bio‐based chemical industry. HMF can be produced by using fructose as a feedstock. Using edible, first‐generation biomass to produce chemicals has been questioned in terms of potential competition with food supply. Second‐generation biomass like miscanthus could be an alternative. However, there is a lack of information if second‐generation lignocellulosic biomass is a more sustainable feedstock to produce HMF. Therefore, a life cycle assessment was performed in this study to determine the environmental impacts of HMF production from miscanthus and to compare it with HMF from high‐fructose corn syrup (HFCS). HFCS from either Hungary or Baden‐Württemberg (Germany) was considered. Compared to the HFCS biorefineries the miscanthus concept is producing less emissions in all impact categories studied, except land occupation. Overall, the production and usage of second‐generation biomass could be especially beneficial in areas where the use of N fertilizers is restricted. Besides, conclusions for the further development of the on‐farm biorefinery concept were elaborated. For this purpose, process simulations from a previous study were used. Results of the previous study in terms of TEA and the current LCA study in terms of environmental sustainability indicate that the lignin depolymerization unit in the miscanthus biorefinery has to be improved. The scenario without lignin depolymerization performs better in all impact categories. The authors recommend to not further convert the lignin to products like phenol and other aromatic compounds. The results of the contribution analyses show that the major impact in the HMF production is caused by the auxiliary materials in the separation units and the required heat. Further technical development should focus on efficient heat as well as solvent use and solvent recovery. At this point further optimizations will lead to reduced emissions and costs at the same time.

Keywords