Scientific Reports (Oct 2023)

Finite-element-analysis of connection strength of assembled camshafts with different cam-bore profiles using tube hydroforming technology

  • Jianping Ma,
  • Zhansi Jiang,
  • Ji Lei,
  • Jinjie Huang,
  • Jun Liu,
  • Lianfa Yang,
  • Haijian Wang,
  • Jianfeng Rong

DOI
https://doi.org/10.1038/s41598-023-46035-w
Journal volume & issue
Vol. 13, no. 1
pp. 1 – 16

Abstract

Read online

Abstract The assembled camshaft is a novel manufacturing product which connects the cam and the mandrel by tube hydroforming (THF) technology after they are processed separately. However, in the process of THF, the structure of the cam-bores has a crucial influence on the connection strength of the assembled camshafts. Therefore, three kinds of cam-bores with circular structure, isometric-trilateral profile and logarithmic spiral profile are selected for hydroforming with a hollow mandrel (tube) in this study. The finite-element-analysis is carried out by ABAQUS software, the variations of (residual) contact pressure and contact area under different structures are obtained, and the torsional angle variations after assembly are measured. Further, the connection strength of the assembled camshaft under three structures is discussed. The results show that the evaluation of connection strength of the assembled camshaft is affected by many factors, including contact pressure, maximum residual contact pressure, axial and circular residual contact pressure, contact area and its rate, residual contact area percentage and torsional angle. Through the comprehensive analysis of various factors, the torsional angle of the camshaft with circular structure is the largest, i.e. poor connection strength. By contrast, the torsional strength of the camshaft with isometric-trilateral profile is the largest, namely, the best connection strength.