Hydroponic Cultured Ginseng Leaves Zinc Oxides Nanocomposite Stabilized with CMC Polymer for Degradation of Hazardous Dyes in Wastewater Treatment

Abstract

This study demonstrated the synthesis of o-carboxymethyl chitosan (CMC)-stabilized zinc oxide nanocomposites (ZnO NCs) combined with aqueous leaves extracts of hydroponically cultured ginseng and used as a photocatalyst for the degradation of hazardous dyes, including malachite green (MG), rhodamine B (RB), and congo red (CR) under ultraviolet illumination. Hydroponic ginseng leaves contain bioactive components, namely ginsenoside and natural polyphenol, which prompt ginseng’s biological effect. Besides, the CMC polymer is naturally biodegradable, stabilizes the nanoformation and enhances the solubility of ginsenoside. The hydroponic ginseng leaves zinc oxide CMC nanocomposites (GL–CMC–ZnO NCs) were synthesized using the co-precipitation method and characterized using different analytical methods. The FTIR analysis identified significant phytochemicals in the leaves extracts and cotton-shape morphology observed using FE-TEM analysis. The XRD analysis also determined that the crystallite size was 28 nm. The photocatalyst degraded CR, RB, and MG dyes by approximately 87%, 94%, and 96% within contact times of 10, 20, 25, and 30 min, respectively, when the dye concentration was 15 mg/L. As far as our knowledge, this is the first report on hydroponic ginseng NCs incorporated with the CMC polymer for the degradation of hazardous dyes on wastewater treatment. This study can add significant value to large-scale wastewater treatment.

Keywords

• hydroponic ginseng
• o-carboxymethyl chitosan (CMC)
• ZnO
• dye degradation
• water treatment