Minimal Redundancy Linear Array and Uniform Linear Arrays Beamforming Applications in 5G Smart Devices

Abstract

Minimum Redundancy Linear Arrays (MRLAs) and Uniform Linear Arrays (ULAs) investigation conducted with the possibility of using them in future 5G smart devices. MRLAs are designed to minimize the number of sensor pairs with the same spatially correlated delay. It eliminates selected antennas from the entire composite antenna array and preserves all possible antenna spacing. MRLAs have attractive features for linear sparse arrays, even if the built-in surface is deformed, it works without problems. To our knowledge, MRLAs have not been applied to smart devices so far. In this work, a 7-element ULAs and 4-element MRLAs (same aperture) were used for the simulation. The Half Power Beamwidth (HPBW) is 0.666 and the Null-to-Null Beamwidth ( ) is 1.385 in ψ-space. In comparison, the standard 4-element arrays are 1.429 and 3.1416, while the standard 7-element linear arrays are 0.801 and 1.795 respectively. Experimental results show that 4-element MLRAs have a narrower mean beam, much higher sidelobes and shallow nulls. Therefore, in terms of main lobe features, 4- elements MRLAs have an improvement over the standard 7-element ULAs. Doi: 10.28991/esj-2021-SP1-05 Full Text: PDF

Keywords

• minimum redundancy linear arrays
• mrlas
• uniform linear arrays (ulas)
• minimum redundant array (mra)
• prolate spheroidal sequences (pss)
• multi-beam antenna (mba)
• planar aperture antennas (paas).