Geoelectrical Sounding to Identify Sub-surface and Groundwater State at Village Banauli, Singrauli District, Madhya Pradesh, India

Abstract

Electrical resistivity (Geoelectrical) methods are well-known and common techniques for investigating the groundwater potential zone. These methods are economically viable and have the highest resolving power compared with other geophysical methods. A total of fifteen Vertical electrical soundings were conducted in the village of Banauli, located in Singrauli district in Madhya Pradesh, India. Vertical electrical sounding was carried out using Schlumberger electrode configuration with the maximum current electrode (AB) spacing of 200 m and potential electrode (MN) spacing of 10 m. For interpretation of measured resistivity, the Partial curve matching technique was used to calculate the layer parameters (resistivity and thickness) and further depict the depth section of the profile. In this study, the maximum five-layer model is obtained, and most curves are of HAK types. The first layer has a mean resistivity value of 12.41 Ωm and a mean thickness of 0.94 m. The second layer has mean resistivity of 7.93 Ωm and a mean thickness of 4.79 m. The third layer has a mean thickness value of 10.55 m and a mean resistivity value of 16.54 Ωm. The fourth layer has a mean resistivity value of 20.17 Ωm and a mean thickness of 9.20 m, and finally, the fifth layer, the bedrock, has a higher mean resistivity value of 59.92 Ωm. Thus, the obtained results may be used for identifying the drilling site for the groundwater potential zone.

Keywords

• groundwater, geoelectrical sounding, village banauli