Quality by Design Approach for a Multicomponent Quantification Using HPLC-PDA and HPLC-MS: Application to Dosage Form and Biological Body Fluids

Abstract

A multicomponent pharmaceutical that contains loratadine, paracetamol, and pseudoephedrine was quantified using HPLC-PDA. The three analytes were well-separated and quantified in the dosage form on a C-18 column using a gradient mobile phase. A quality by design strategy was followed to achieve the challenging separation. Screening and optimization steps were carried out to investigate the effect of many factors on the studied responses with a minimum number of runs. The ANOVA of the factorial model showed that % acetonitrile (factor A), flow rate (factor B), and pH (factor C) were significant. The detection of the analytes’ peaks was carried out using a PDA detector at 248nm for loratadine and paracetamol, and 214 nm for pseudoephedrine. The second method was SPE-HPLC-MS, where the three analytes and desloratadine, the active metabolite of loratadine, were quantified in spiked plasma and urine, using betamethasone valerate as an internal standard. The recovery of the analytes from body fluids was above 96%, and the LOQ was below 0.5 ng/mL. The validation of the developed HPLC-PDA method was achieved as per ICH guidelines, whereas the HPLC-MS method was validated according to FDA guidelines for bioanalytical method validation. The results were compared with the reported method, and no significant differences were found.

Keywords

• HPLC
• MS
• plasma
• quality by design
• loratadine