Unsteady 3D heat transport in hybrid nanofluid containing brick shaped ceria and zinc-oxide nanocomposites with heat source/sink

Abstract

In the field of nano-composites, hybrid nano-fluids have noteworthy applications in aerospace, energy materials, thermal sensors, antifouling, etc. because of their ability to produce higher thermal conductivity than conventional nanofluids. Different combinations of nanocomposites have been found in the literature to develop the suitable hybrid-mixture, but no study has been found yet about the combined influence of ceria and zinc-oxide nanocomposites in the host liquid. In this article, unsteady 3 D transport of water driven hybrid nano-fluid with the consequences of brick shaped nanocomposites (ceria; and zinc oxide; ) has deliberated with the thermal link of heat source/sink. Variable thermal conditions have been supplied at the surface with the effect of a magnetic environment. Similarity relations have been used to articulate the transport equations into solvable forms and then solved numerically via Keller-Box method. Nusselt number and skin-friction coefficients have also plotted with the wide ranges of involved parameters. Thermal setup has also briefly been discussed with the non-uniformity of surface temperature. Rate of heat transfer has significantly improved with the amounts of ceria (1 wt% to 10 wt%) and zinc-oxide (1 wt% to 10 wt%) nanocomposites. The Nusselt number is reported in the range of 4.0 to 4.8 with the increasing amount of from −0.6 to −0.2, whereas it is reported in the range of 3.1 to 3.9 with the varying amount of from 0.2 to 0.6. Rate of heat transfer is observed higher for zinc-oxide nanoparticles as compared to ceria nanoparticles.

Keywords

• brick shaped nanocomposites
• ceria
• heat source/sink
• hybrid nanofluid
• mhd
• unsteady 3d dynamics
• variable thermal conditions
• zinc-oxide