Dimensioning of Reactive Power Compensation in an Autonomous Island System

Abstract

In this paper, a method for sizing the reactive power compensation in a non-interconnected island power system is presented and applied to determine the necessary inductive reactive power compensation for the autonomous power system of Rhodes Island, Greece. The Rhodes power system is often confronted with an excess of reactive power, as a result—inter alia—of underground high-voltage (HV) cable lines and distributed generation penetration. Reactive power compensation is typically a local issue in power systems, usually aiming at maintaining an acceptable voltage profile on specific transmission segments, e.g., long underground or submarine cables. In autonomous systems, however, where network lengths are relatively short, reactive power compensation is meant to address the overall reactive power equilibrium of the system. The proposed method follows a three-step approach. First, power flow analysis is conducted to determine the size of the maximum compensation that may be necessary, i.e., the compensation size that practically allows unit commitment to be conducted without being constrained by reactive power considerations. Then, a unit commitment and economic dispatch model is executed over the course of a year to determine the optimal compensation size, using the output of the power flow analysis to formulate reactive power balance constraints. Finally, the results of the economic optimization are assessed in terms of dynamic security to verify the feasibility of the optimal solution.

Keywords

• autonomous power systems
• cost-benefit analysis
• dynamic security
• overvoltage stability
• reactive compensation
• unit commitment