Boxcar Averaging Scanning Nonlinear Dielectric Microscopy

Abstract

Scanning nonlinear dielectric microscopy (SNDM) is a near-field microwave-based scanning probe microscopy method with a wide variety of applications, especially in the fields of dielectrics and semiconductors. This microscopy method has often been combined with contact-mode atomic force microscopy (AFM) for simultaneous topography imaging and contact force regulation. The combination SNDM with intermittent contact AFM is also beneficial for imaging a sample prone to damage and using a sharp microscopy tip for improving spatial resolution. However, SNDM with intermittent contact AFM can suffer from a lower signal-to-noise (S/N) ratio than that with contact-mode AFM because of the shorter contact time for a given measurement time. In order to improve the S/N ratio, we apply boxcar averaging based signal acquisition suitable for SNDM with intermittent contact AFM. We develop a theory for the S/N ratio of SNDM and experimentally demonstrate the enhancement of the S/N ratio in SNDM combined with peak-force tapping (a trademark of Bruker) AFM. In addition, we apply the proposed method to the carrier concentration distribution imaging of atomically thin van der Waals semiconductors. The proposed method clearly visualizes an anomalous electron doping effect on few-layer Nb-doped MoS2. The proposed method is also applicable to other scanning near-field microwave microscopes combined with peak-force tapping AFM such as scanning microwave impedance microscopy. Our results indicate the possibility of simultaneous nanoscale topographic, electrical, and mechanical imaging even on delicate samples.

Keywords

• scanning nonlinear dielectric microscopy
• boxcar averaging
• scanning probe microscopy
• scanning near-field microwave microscopy
• scanning microwave impedance microscopy