Design and Experiment of an Unmanned Variable-Rate Fertilization Control System with Self-Calibration of Fertilizer Discharging Shaft Speed

Abstract

In response to the problems of low control accuracy, single detection of operating parameters, and insufficient collaborative control of unmanned fertilization in field fertilization operations, this paper proposes an adaptive control strategy for fertilizer discharging shaft speed based on segmented linear interpolation method. By constructing a relationship model between fertilizer discharging shaft speed and motor control signals in different speed ranges, the on-site self-calibration of fertilizer discharging shaft speed and the precise control of the fertilization rate is achieved. At the same time, real-time detection and warning technology for multiple working condition parameters were integrated, and a bus communication protocol between unmanned tractors and variable-rate fertilizer applicators was developed. A variable-ratefertilization monitoring system based on unmanned tractors was developed, and actual experimental tests were conducted to test the system’s performance. Among them, the calibration test results of fertilization rate showed that the discharging rate of the fertilizer apparatuses (p) was negatively correlated with the rotation speed of the fertilizer discharging shaft, and that the installation position of the fertilizer apparatuses affected the uniformity of fertilization between the rows of the fertilizer applicator. The speed response test of the fertilizer discharging shaft showed that the average response time (Ts) of the fertilizer discharging shaft speed controlled by the self-calibration model was 0.40 s, the average steady-state error (ess) was 0.13 r/min, and the average overshoot (σ) was 7.33%. Compared with the original linear model, the ess was reduced by 0.23 r/min, and the σ was reduced by 1.54 percentage points. The results of the fertilization status detection tests showed that the system can achieve real-time detection of different operating parameters and states, as well as collaborative control of tractors and fertilizer applicators. The results of the fertilization rate control accuracy test showed that the average fertilization control error of the system was 1.91% under different target fertilization rate, which meets the requirements of variable-rate fertilization field operations. This study can serve as a technical reference for the design and development of fertilization robots in the context of unmanned farm development.

Keywords

• variable rate fertilization
• unmanned operation
• fertilizer applicator
• collaborative control
• condition monitoring
• CAN bus