Archives of Foundry Engineering (May 2023)

Development of Process Conditions for the Preparation of Copper Alloys Post-Production Chips for the Continuous Casting Process

  • W. Malec,
  • B. Cwolek,
  • A. Brudny,
  • J. Kulasa,
  • W. Marek,
  • K. Stolorz,
  • D. Wróbel,
  • A. Filipowicz

DOI
https://doi.org/10.24425/afe.2023.144294
Journal volume & issue
Vol. vol. 23, no. No 2
pp. 43 – 50

Abstract

Read online

The paper presents the results of research aimed at developing assumptions for the preparation of a charge in the form of fine scrap copper alloys (chips/shells) guaranteeing effective removal of impurities and obtaining a metal bath of the required metallurgical quality. The tests were conducted for tin-zinc-lead bronze of the CC499K grade. As part of the work, the characteristics of this type of waste available on the market were made in terms of quality and the possibility of their use for the production of both alloys and finished products, taking into account the elimination of harmful impurities that may ultimately affect the production process adversely. The subject of the work was the selection of appropriate waste cleaning methods in the form of an oily shell in the CC499K (CuZn5Sn5Pb2) grade and its drying in terms of increasing the use of impure waste from machining as scrap for direct melting. The waste was assessed in relation to individual parametres. The research was carried out on 3 groups of waste, with varying degrees of moisture.

Keywords