Dynamic Response Characteristics of Rotating and Fixed Components of the Kaplan Turbine under Low and Medium Heads

Abstract

The vibration of large Kaplan turbines has always been one of the key research issues of turbines. Affected by the load and head of the power station, the Kaplan turbine will operate under medium and low heads, and the components will vibrate violently, seriously threatening the stable operation of the unit. Compared with other types of turbines, the runner structure of the Kaplan turbine is more complex. Therefore, in addition to the fixed components, the dynamic response characteristics of the rotating components are also be the focus of this study. In this paper, four operating points under high, medium and low heads are selected. The unsteady flow field and fluid–structure interaction are calculated. The modal and dynamic stress characteristics of the fixed components (bottom ring, head cover and support cover) and the rotating components (blades, runner body and main shaft) are analyzed. The results show that the location of the stress concentration of fixed components under low heads changes significantly, and the stress fluctuates greatly due to the influence of the stay vanes. The rotating components are more affected by the rotation of the runner under low heads, and the displacement and stress fluctuations of the rotating structure are significantly greater than those of medium and high heads. The pressure fluctuations in the vaneless area and draft tube cause some low-frequency excitation. The stress fluctuations of rotating components under low heads are much greater than those of the fixed components. This shows that the head has a greater impact on the rotating components, which is more likely to cause damage to the rotating components, seriously threatening the stable operation of the unit.

Keywords

• fixed components
• rotating components
• fluid–structure interaction
• dynamic response characteristics