Experimental Study of the Mechanical Behavior of Local Wood Terminalia Superba (Fraké) by Glued Wood Assembly According to the Beveled Configuration

Abstract

The design of structural elements, the design of connections and supports, and damage have a significant influence on the technical characteristics of wood construction projects. An innovative experimental study was carried on locally obtained glulam beams. This study aimed to evaluate the load-bearing capacity of a finger-jointed Terminalia Superba (fraké) lamellae during routine use of an adhesive in the local area and to improve the connections in glulam structures. The achievement of this objective will allow to determine the influence of the technical characteristics of finger-jointing on the mechanical resistance, to maximize the mechanical resistance of the reconstituted beams, and eventually to minimize the losses due to sawing. All this will have a considerable impact on the technical and economic aspects of a wood construction project. The physical aspect of the species was studied and properties found. The influence of variation in density, the bonding surface, and joint efficiency on the bending strength (MOR) of Terminalia Superba (fraké) was studied. Mechanical properties were found and related to the optimum joint angle α, and the breaking point reads 0.20 mm. For the angular range of [0°–30°], adhesive failures are witnessed, and beyond this range, the failures are mixed. The 45° finger-jointing angle appeared to be better in the axial traction mode of rupture.