In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing

Abstract

Biodegradable magnesium (Mg) and its alloy show huge potential as temporary bone substitute due to the favorable biocompatibility and mechanical compatibility. However, one issue deserves attention is the too fast degradation. In this work, mesoporous bioglass (MBG) with high pore volume (0.59 cc/g) and huge specific surface area (110.78 m2/g) was synthesized using improved sol-gel method, and introduced into Mg-based composite via laser additive manufacturing. Immersion tests showed that the incorporated MBG served as powerful adsorption sites, which promoted the in-situ deposition of apatite by successively adsorbing Ca2+ and HPO42−. Such dense apatite film acted as an efficient protection layer and enhanced the corrosion resistance of Mg matrix, which was proved by the electrochemical impedance spectroscopy measurements. Thereby, Mg based composite showed a significantly decreased degradation rate of 0.31 mm/year. Furthermore, MBG also improved the mechanical properties as well as cell behavior. This work highlighted the advantages of MBG in the fabrication of Mg-based implant with enhanced overall performance for orthopedic application.

Keywords

• Laser addictive manufacture
• Mg-based composite
• Mesoporous bioglass
• In-situ deposition
• Degradation behavior