Experimental Research on Permeability of Coal and Rock Mass considering Postpeak Failure

Abstract

In most mining areas of China, coal seams are characterized by low gas pressure, poor permeability, and high gas adsorption capacity, all of which have brought considerable difficulties to coal seam mining and coalbed methane (CBM) extraction. According to the multiyear scientific research and production practice of China, gas is migrated in quantity only after the coal body is directly mined, and the surrounding rocks deform and fracture under the mining influence. Thus, the key to effective control of gas migration and the coal and CBM comining technology lies in investigating the gas resolution, permeation, migration, and accumulation laws in the coal seams under the unloading confining pressure during mining. The MTS815.02 rock mechanics testing system and its supporting equipment are combined to test the permeability characteristics of coal and rock mass (postpeak fractured coal and sandstone specimens) under the loading and unloading of confining pressure using the steady method, and then, the permeation laws of the fractured coal and rock mass are obtained. Results show that after the postpeak rock crack propagation reaches a stable state, the confining pressure gradually increases, and the gas permeability presents an approximately linear reduction; in the postpeak unloading phase, the opening and coalescence degree of rock cracks gradually increase as the deformation extends. Thus, permeability reaches a peak value. The strain softening phase follows, where the cracks are closed and permeability declines to a certain extent. Moreover, the unloading step size of confining pressure has bearing on gas permeability. Specifically, as the unloading step size of confining pressure decreases, the change of gas permeability increases in stability.