Performance assessment on manufacturing of unfired bricks using industrial wastes

Abstract

This paper presents eco-friendly unburnt bricks made up of fly ash, waste plastic powder, waste glass powder, lime, gypsum and crusher sand as alternatives to conventional burnt clay bricks for sustainable development. The research focuses on the maximum utilization of industrial waste in eco-friendly unburnt brick production. Materials are characterized according to their chemical and geotechnical properties. In this research, we use a milled waste glass powder of size less than 600μm and plastic powder obtained from plastic waste of size less than 600μm are added along with crushed sand, gypsum, lime and fly ash with various mix proportions concerning FaL-G mix concept. All the proportions were taken on a weight basis. Compressive strength, water absorption, and efflorescence are the key parameters chosen for comparing the innovative brick with conventional fly ash brick. There are five different mixes (Type A, B, C, D & E) are made in this research. The plastic and glass powders are replaced by crusher sand at the increased rate of 2% in every mix whereas 2%,4%,6%,8%, and 10%. It was found that the type B bricks have 17.63% strength was increased when compared to base mix. From the test results, type B bricks have enhanced mechanical performance when compared to all other mixes.

Keywords

• waste plastic powder
• waste glass powder
• crushing strength
• water absorption
• efflorescence